Wet Basem*nt Solutions: How to Stop the Leaks From Coming (2024)

Got Water in the Basem*nt?

A wet basem*nt is more than a nuisance. If your basem*nt includes finished living space, any kind of moisture can ruin carpeting, drywall, and framing. Even if you have a crawl space or just use your basem*nt for storage, a simple case of condensation can buckle hardwood flooring on the level above and spawn harmful mold.

If you have a soggy basem*nt, you’re not alone. The American Society of Home Inspectors, based in Des Plaines, IL, estimates 60 percent of U.S. homes have wet basem*nts, and 38 percent run the risk of basem*nt mold.

What Causes a Wet Basem*nt?

The water in the basem*nt most often comes from rainfall and melting snow. Even a small storm can trigger a deluge. For example, a house with a 1,500-square-foot roof sheds 1,000 gallons of water for every inch of falling rain. In tougher cases, the problem is rising groundwater, which may even be fed by an underground spring. Once the water accumulates around your foundation, it works its way inside through cracks, joints, and porous material.

How Much Does It Cost to Waterproof Your Basem*nt?

Hiring a pro can cost anywhere from a few hundred dollars to many thousands. But even if you’re knee-deep in water, don’t call your banker yet. You can solve most wet-basem*nt problems yourself for significantly less than you’d pay a professional.

The key is to determine which of the three major problems you have: condensation, runoff, or subsurface seepage. Learn how to fix a wet basem*nt with our solutions below.

1. Condensation

Also called sweating, condensation shows up as water droplets, wet spots, or puddles on basem*nt floors and walls. It happens when moist, warm air hits cool foundation walls or uninsulated cold-water pipes, dampening carpets, rusting appliances, and turning the basem*nt clammy. In crawl spaces, condensation encourages wood rot and insect attack, and can buckle and delaminate plywood.

Do You Have a Condensation Problem?

Condensation is easy to confuse with runoff or subsurface water. To tell it from the others, tape foil over damp spots and check it after a day. If moisture forms on the outer foil face, water is condensing from the air. If moisture forms on the foil underside, water is seeping in from outside.

How to Prevent Condensation

Start with the easy stuff. If you have a full basem*nt, air it out by opening windows and running fans. Also consider installing a dehumidifier (about $230 for a heavy-duty unit that will process 50 pints in 24 hours), ideally in a spot near easy drainage. Some experts argue that lowering the humidity in a basem*nt will draw more moisture in, because moisture naturally migrates from higher humidity levels to lower ones. But as Chris Carter, of Ever-Dry in Fort Wayne, Indiana, explains, “The dehumidifier may draw in 10 to 20 percent more moisture, but it can easily process it.” Bottom line: a drier basem*nt.

During colder months, turn up the heat in the basem*nt. Also insulate all cold-water pipes with foam insulation to keep moist air from contacting them, and be sure the clothes dryer vents to the outside with no duct leaks. Finally, don’t dry clothes on a line in the basem*nt or store wet firewood there.

Another effective solution is to damp-proof walls with a waterproof coating, such as UGL’s DryLok Waterproofer (about $20 a gallon). Xypex’s Hi-Dry ($21 for 5 lbs.) takes a slightly different approach. It’s a crystalline penetrant that clogs concrete pores.

If your home has a crawl space rather than a full basem*nt, cover the ground in the space with plastic sheeting 6-mil polyethylene is the most durable and generously overlap seams. You may also want to consider increasing the number of foundation vents to promote air circulation that will carry moisture away.

Extreme Condensation Cases

If you continue to see moisture after trying these cures, then you’re not dealing with condensation.

2. Runoff

See Also

How To Easily Find Where Your Basem*nt Leak Is Coming From - House DigestHow to Fix a Leaky Basem*nt Wall From the Inside and OutsideBasem*nt Leaks Where Wall Meets Floor: How to Fix - MellowPineWhy a Basem*nt Leaks and How to Fix it Permanently

Rainwater or melted snow that isn’t routed away from the house is the most common cause of basem*nt and crawl space moisture. Runoff percolates through porous topsoil and then stops at the compact soil near the base of the foundation. Hydrostatic pressure forces the water through gaps or cracks in walls and footings. Water also moves through porous walls by capillary action.

Do You Have a Runoff Problem?

A damp crawl space or wet basem*nt walls and floors just after a storm or as snow melts are telltale signs the problem is runoff.

Look for ways runoff can enter your basem*nt or crawl space. Check that the ground outside slopes away from your house at least 1 inch vertically for every 1 foot of horizontal travel. Then make sure downspout runoff isn’t pooling or percolating into soil near the foundation during a storm, and that downspout seams aren’t leaking; installing downspouts seams-out makes this check easy.

Next, check that driveway curbs are channeling runoff to the street. Look for unsealed cracks on the driveway surface, which can allow water to collect below grade. Some houses on hilly sites have a swale: a shallow trench with gently sloping sides and a gravel bed covered by topsoil and grass. The swale catches runoff, channeling it past the house or off to other drain systems. Unfortunately, a swale can eventually clog with silt and so can the original underground footing drains buried at the base of your foundation.

How You Can Prevent Runoff

Patching Cracks and Sealing Walls

If you’re dealing with a full basem*nt, start by patching cracks in the foundation and sealing basem*nt walls. Use a polyurethane masonry caulk like Sikaflex ($7 per tube) or UGL’s Masonry Crack Filler (about $5 per tube).

For 1/4-inch or larger cracks, use hydraulic cement, which expands as it dries. Leading products on the market include Thoro Waterplug (about $16 for 10 lbs.), Custom Building Product’s Custom Plug (about $14 for 12 lbs.) and UGL’s Fast Plug (about $20 for 10 lbs.).

For both basem*nts and crawl spaces, you need to address outside entry points next by patching cracks in the driveway using cold-mix asphalt patching compound. For a concrete sidewalk or driveway, use ordinary cement.

Clean Gutters

Also, clean gutters so they won’t overflow. (If your home is not equipped with gutters, install them.) And make sure the soil around the foundation slopes away from the house 1 inch per foot for a distance of 4 feet. And add downspout extensions if needed so gutters drain 4 feet away from the house onto splash blocks.

Many homes have an existing underground drainage system. Unfortunately, the system often breaks apart or fills with silt after several decades. You can call in a drain-and-sewer-cleaning contractor who will use a long power snake to try to clear the lines. But often they just have to be capped off at the surface and abandoned.

Instead, drain rainwater from gutters into a dry well: a hole lined or filled with gravel or a tank that allows runoff to soak into the ground slowly. The Flo-Well system (about $150), which features a plastic tank wrapped with polypropylene fabric to block silt, is a typical residential dry well. It can handle runoff from a 500-square-foot section of roof. Install a dry well at least 10 feet from the house in a hole 3 feet deep. Then cover it with soil and put a plant on top to mark its location should the system back up. Planting grass alongside your house is another way to absorb excess water. But don’t plant trees; their roots can damage the foundation and an underground drainage system.

Extreme Runoff Cases

If water is still gushing into your basem*nt, call in a professional. Otherwise, consider an interior gutter. This dam-and-channel system goes around the perimeter of the basem*nt floor and collects water that flows down or through the walls or floor, routing it to a floor drain or sump pump.

The Squid-Gee Dry system from Waterproof.com LLC can be built to size using 4½-foot-long PVC sections ($11.98 each) that are joined like PVC pipe with couplings ($5.99 for a 5-pack). Special epoxy holds the gutters to the floor. The DryTrak from Basem*nt Systems uses the same gutter principle for professional installation (about $35 per linear foot), which includes a sump pump.

3. Subsurface Runoff

If your wet-basem*nt symptoms act like runoff but occur all the time, you’re probably dealing with high groundwater.

Do You Have a Subsurface Problem?

Unless the foundation is surrounded by soil that has a high clay content, which can hold rainwater and snowmelt for months, runoff problems usually come and go as storm water drains away. But if your basem*nt is consistently wet long after a storm, or if water is coming up through the basem*nt floor, flowing through your walls or bubbling up where the walls meet the floor, you probably have a subsurface water problem. Check with your city or town to see if the water table is unusually high in your area or if underground springs are common.

Controlling Subsurface Problems

You may want to call a pro for these problems. Solutions range from the relatively simple (injecting absorbent clay into the soil and urethane caulk into cracks, $500 and up) to the more involved (creating a sump and installing a sump pump, which costs about $300 to $700).

A contractor may also suggest combining a sump pump with perimeter drains made of 4-inch perforated PVC drainpipe laid in gravel inside foundation footings. These interior systems, which channel away water before it enters, require extensive jackhammering and roughly cost $3,000 to $5,000.

Exterior systems, which run at the base of footings, are even more complicated; they require removing the landscaping, excavating to expose the foundation, covering it with a waterproof membrane and laying perimeter footing drains in a bed of gravel. This can easily cost up to $10,000.

Considering the high cost of quelling subsurface water, doing it right is crucial:

• Be sure the contractor is insured and offers guaranteed work.
• Get a firm or not-to-exceed price with detailed specifications.
• Ask three past clients the following: Would you use the contractor again? Did he solve the problem? And, did he respond promptly to callbacks?